|
|
|
|
|
|
 |
|
|
 |
Testing water in your pond is an easy way to identify sources of pond problems. The use of water testing kits is the most important first step to take when managing a pond.
Once you test for the basic parameters, you can call or email us for an interpretation of your results.
FOR EARTHEN BOTTOMED LARGE PONDS: The most important parameters for water testing earthen ponds are pH and Total Alkalinity. If in addition ,if there are high populations of fed fish such as fish raising facilities, all the parameters for water gardens need to be monitored. These parameters can easily be tested with the Microbe-lift 5 in 1 Test Kit.
Total Alkalinity is a measure of dissolved carbonates in the pond. The value should be above 100 mg/l for the healthiest pond. Carbonates are used by both fish and even more importantly, beneficial bacteria, to build cell walls. Ponds with rapidly growing thriving colonies of beneficial bacteria are the cleanest ponds. So, keep this level up. If you total alkalinity is below 100 mg/l, boost it by adding crushed limestone. A good rule of thumb is 1 ton per surface acre. For a more definitive dosing rate, consult your local County Extension Agent.
pH: Is best when between 7.5 and 8. pH correction is recommended when values are out of this range.
Barley Straw treatments and Aeration Systems are most effective when the pH is above 7.5. Test pH first thing in morning to identify minimum levels.
|
|
|
Water testing is easy, inexpensive, and invaluable for troubleshooting pond problems.
|
|
|
|
